Filter
Top Products
16
BASIC OPERATIONS
SYSTEM SETTING
• When you press the [SYSTEM] button, the TV screen shows
the information as : “Press [SYSTEM] button again.” Press
the [SYSTEM] button again, the video out system changes
as follows.
According to the system of the TV to be connected, set the system of the unit to make it
match the TV.
In STOP mode, press SYSTEM button on the remote control, then choose TV TYPE.
SYSTEM
NTSC
PAL
AUTO
V-MODE (WHEN SELECTING CVBS/RGB/HDMI)
V-MODE
• In case of connecting the component, press the V-MODE on
the remote control to select CVBS / RGB / HDMI. In case of
selecting HDMI, S-VIDEO signal is not output.
When you press the [V-MODE] button, the TV screen shows
the information as : “Press [V-MODE] button again.” Press
the [V-MODE] button again to change the video mode.
When you connect the Composite, picture is not displayed, press the
V-MODE on the remote control to select Composite video.
USB/DISC
Choose one between USB and disc (You can select one only
that is inserted in).
• After inserting USB, press USB/CARD button on the remote
control to select one between USB and disc.
• When you press USB/CARD button, the TV screen shows :
DISC and USB
Move the cursor in the position of desired item by pressing
[œ √…†]
button
and press PLAY button.
USB/CARD
DV- 2500H English for agon 2006.10.25 11:6 PM ˘`16