Filter
Top Products
SPDIF SETUP PAGE:
SYSTEM SETUP
_
_
_
_
_
_
_
_
_
_
FULL
6/8
4/8
2/8
OFF
_
_
_
_
_
_
_
_
_
_
E3
SPDIF OUTPUT SPDIF OFF
SPDIF RAW
SPDIF/PCM
MANUAL
CD SPDIF OFF
SPDIF RAW
SPDIF/PCM
DOBLY DIGITAL SPDIF OFF
SPDIF RAW
SPDIF/PCM
DTS SPDIF OFF
SPDIF RAW
SPDIF/PCM
MPEG SPDIF OFF
SPDIF RAW
SPDIF/PCM
SPDIF SETUP PAGE
SPDIF OUTPUT
Turn OFF the optical and coaxial output, only
analog output. If in manual mode, you can
choose different output mode according with
different disc. Reference setup is "SPDIF
RAW".
CD, DOBLY DIGITAL, DTS, MPEG
When SPDIF output is manual, please setup
SPDIF output setup according with CD, DOLBY
digital, DTS, MPEG Disc. If no optical output
on these four modes, please set up SPDIF
output to "SPDIF RAW". Reference setup is
SPDIF RAW.
LPCM OUTPUT
To set up different mode bwtween 48HKz to
96KHz according with different audio signal
source.
Note: some amplifier cannot support 96HZ
signal, and lead to unnormal sound from optical
or coaxial digital output.
The reference setup is 48 KHZ.
DYNAMIC
If watch dynamic scope large movie
programmer at night, to select this mode to
reduce the volume, meantime keep the little
Note: Please set up this items in the case of
opening disc tray.
DIALOG
When playing the disc, set up this item to
adjust voice dialog on, In DOWNMIX 5.1
CHANNEL mode, the function is not available.
The reference set up is minimum volume.
POST DRC
Enable the item, when system power on,
current increases slowly to the speaker, to
prevent the speaker from electrical shork.
Disable the item, the function is no use. When
Automatic, system can setup automatically.
The reference set up is on.
LPCM OUTPUT 48K
96K
DYNAMIC
AUDIO SETUP