Filter
Top Products
OPERATION INTERFACE
The unit supports two choices of audio
output: Analogy audio and digital audio.
Analog audio includes stereo 2 channel and
5.1 channel. Digital audio includes optical and
coaxial output. Digital audio obtains a better
effect than analog.
Stereo Output:
Connect with audio output jack for the mixing
audio of the unit and the stereo input of TV
or amplifier by audio cable.
5.1 channel output:
Connect with 5.1 channel output of the unit
and corresponding input of amplifier by audio
5.1 channel cable.
Coaxial output:
Connect the Digital coaxial cable to the coaxial
output of the unit and the corresponding input
of amplifier.(with digital coaxial inlet)
Optical output:
Connect the Toslink optical cable to the optical
output of the unit and the corresponding input
of amplifier.(with digital optics inlet).
stereo input of TV or amplifier.
Each connection must match to the internal
setup of the unit. Please refer to the unit and
the connection equipment before connection.
DVD player supplies a wide dynamic range
of frequencies so the amplifier volume must
be suitable levels or the speakers may be
damaged from sudden bursts of high volume
sounds.
During the operation, please power off
amplifier before power on/off DVD player, the
speaker may be damaged.
Setup Before Operation:
Before operation, please make sure the
following setup is correct.
Audio Output:
The unit has four choices of audio output: 2
channel, digital, 5.1 channel and stereo PCM.
Select different setup depending on your
connection. For more information, please refer
to system setup.
TV System:
Select the corresponding system depending
on your TV system. For more information,
please refer to system setup.
Video Output:
The unit has three choices of video output:
composite video, S-video, component video
output. Select different setup depending on
your connection. For more information, please
refer to system setup.
Note:
DVD disc can support different scale of
pictures. Maybe picture is not full screen or
part of picture has been blocked.
The manual refer to English OSD.
C5