Kodak P60W26 Flat Panel Television User Manual


 
20
PC Setup
- You can easily connect the Plasma Display to your PC for outstanding image and sound.
- Use the Monitor to display images and sound from a PC Computer source.
On the remote control
How to use
(+)( ) (+)( )
AUDIO
(MONO)
RLVIDEO Y P
BR
P
AV INPUT
AUDIO
RL
R
L
EXTERNAL SPEAKER (8) AC INPUTAUDIO INPUTS-VIDEO
COMPONENT
(480i/480p/720p/1080i)
RGB-PC INPUT
(VGA/SVGA/XGA/SXGA)
RGB-DTV INPUT
(480p/720p/1080i)
(DVD/DTV INPUT)
(+)
( )
(+)( )
AUDIO
(MONO)
RL
AV INPUT
S-VIDEO
COMPONENT
(480i/480p/720p/1080i)
(DVD/DTV INPUT)
RGB-PC INPUT
R
AUDIO INPUT
EXTERNAL SPEAKER
(8)
RL
AC INPUT
L
AUDIO
(VGA/SVGA/XGA/SXGA)
RGB-DTV INPUT
(480p/720p/1080i)
VIDEO
YP
B
P
R
RS-232C
RS-232C
Tips
Back panel of the Monitor
Setup Instructions to Connect a PC to your Monitor
If the image output of the PC is set higher than
UXGA, no picture will appear on the Monitor.
(UXGA is not supported.)
Connect the signal cable from the monitor Output
port on the PC to the RGB-PC INPUT
(VGA/SVGA/XGA/SXGA) port on the Monitor.
Connect the audio cable from the PC to the Audio
ports of the Monitor. (Audio cables are not supplied
with the Monitor.)
To set up the Monitor to operate within a PC win-
dows environment, select Normal, Standard or
Default monitor.
The Monitor can not be used for Plug and Play
functionality.
If your PC computer is equipped with a sound card,
adjust the sound output on the PC.
It is recommended that the resolution output of the
PC should be set to 1280 x 720 to get the best
quality picture. (Look for a video card that uses the
nVIDIA GeForce 2 pro or similar chipset that
supports this resolution)
PC Setup
First, turn on the PC computer and press the ON/OFF button on the
Monitor to apply power to it. Second, turn on the display by pressing
the button on the Monitor or by pressing the POWER button on
the Monitors remote control.
Use the video/pc button on the remote control to select the RGB
input source.
Set the resolution output of the PC to SXGA or under (1280 x 1024,
75Hz). (Refer to page 21.)
Avoid keeping a fixed image on the Monitor's screen for a long period of time. The fixed image may
become permanently imprinted on the screen; use a screen saver when possible.
If the resolution output of the PC computer is over SVGA, connect the PC to the RGB-PC
(VGA/SVGA/XGA/SXGA) input port on the Monitor. Change the PC computer resolution output
accordingly.
video/pc