Kodak P60W26A Flat Panel Television User Manual


 
29
Safety instructions
Monitor Overview
Basic operation
Sleep timer
Picture & Sound
Special features
Others
Connections
Twin picture mode
- As the name suggests, this mode splits the screen into 2, allowing 2 sources to be shown on
the monitor screen at the same time. Each source is given half the screen.
- Select RGB input source.
- This function works only in the following resolutions;
DTV 480p/720p/1080i, RGB 640x480 (only in Vertical frequency 60 Hz)
- With TWIN PICTURE active, not all picture formats can be used for the main/sub picture.
Press the twin picture button.
Each time you press twin picture or vol buttons, you can
select ON or OFF.
<ON>
<OFF>
DW
F
OFF
G
DW
F
ON
G
Sub picture
Main picture
To avoid a permanent image
being burned into the screen,
the sub picture will move
every 2 hours.
:Center Upside
Downside Center
The sub picture starts in the
center position and then
moves as described above.
You may notice a small
amount of video noise at the
bottom or top of the sub pic-
ture. This is normal.
twin picture