Filter
Top Products
- 22 -
It is possible that you are using the wrong code. Start the >
brand code search, the automatic code search or the di-
rect code input (manual).
The URC does not change the station on the device.
Press the corresponding device button
> e to set the URC
to the correct mode.
In the event that the original RC does not have a "-/- -"
>
button, change the programme with the CH+/— buttons u
or the number buttons o.
If this also does not work the child protection for the
>
target device could be activated.
Some buttons on the URC do not function properly.
It is possible that your URC does not have all of the func-
>
tions that are on the device's original remote control.
It is possible that you have not programmed in the optimal
>
code. Search for a code that supports more of the target
device's functions.
The URC stops reacting after a button is pressed.
The batteries must have enough voltage and be properly
>
installed.
Point the URC towards your device.
>
The LCD display q shows nothing.
The batteries must have enough voltage and be properly
>
installed.
The contrast could be set too low. Increase the contrast
>
setting.
Disposal
Do not dispose of the device in your normal
domestic waste. This product is subject to the
European directive 2002/96/EC.
Universal remote control
Have the universal remote control or parts of it disposed
•
of by a professional disposal company or by your commu-
nal disposal facility.
Observe the currently applicable regulations. In case of
•
doubt contact your disposal facility.
Batteries/rechargeable batteries
Used batteries/rechargeable batteries may not be dis-
•
posed of in household waste.
Batteries can contain poisons which are damaging to the
•
environment. Therefore, dispose of the batteries/recharge-
able batteries in accordance with statutory regulations.