Filter
Top Products
- 9 -
8.5 Connection via VGA
This connection variant is only possible with very high grade televisions,
LCD/Plasma screens or Video projectors. For this type of connection the television
must have available a VGA input and two audio "IN" cinch sockets. Check
with the instruction manual of the corresponding playback device to see if
this connections variant is available. It is possible that additional playback
device settings may have to be implemented.
For this connection variant you will need:
• an audio cinch cable (not supplied)
• a VGA cable (not supplied) These can be obtained from your dealer.
Connecting the DVD player via VGA:
• Connect the jack inscribed with VGA using a VGA cable to the
corresponding socket on the television.
• Secure both plugs of the VGA cable with the screws.
• Insert the white audio cinch cable plug into the cinch socket inscribed
"
L" on the rear panel of the DVD player.
• Then insert the white plug at the other end of the audio cinch cable into
the left channel audio socket on the television.
• Insert the red audio cinch cable plug into the cinch socket inscribed "
R"
on the rear panel of the DVD player.
• Then insert the red plug at the other end of the audio cinch cable into
the right channel audio socket on the television.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select from the menu
Video/Video Out/VGA
.
On this topic see also chapter 10.3
„Video settings: Video output.
8.6 Connection via HDMI
This connection variant is only possible with very high grade televisions,
LCD/Plasma screens or Video projectors
Check with the instruction manual of the corresponding playback device to
see if this type of connection is available. It is possible that additional playback
device settings may have to be implemented. For this type of connection you
will need a HDMI cable (not supplied); this can be obtained from your dealer.
Connecting the DVD player via HDMI:
• Connect the jack inscribed with HDMI using a HDMI cable to the
corresponding socket on the television.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select from the menu
Video/Video Out/HDMI
.
On this topic see also chapter 10.3
"Video settings: Video output".