Filter
Top Products
Overview
3
Figure 1: Optical All-Fiber DVI Cable
3.1 System Requirements for Setup (Hardware)
You must have a DVI graphic source or card that:
Has a DVI port (for example, in your PC, SUN or Mac system) supporting
a DVI-D signal
Supports the maximum graphic resolution of the display that you want to
connect
There are no special requirements regarding:
The memory size, CPU speed and chipsets, if the DVI graphic controller
or card is properly installed
Software, if the DVI graphic controller or card is properly installed in
your Operating System
Note: The transmitter module of the Kramer Optical All-Fiber DVI Cable is
designed to use +5V internal power supplied through a DVI pin (#14) from
the graphic card. While the transmitter module may receive power from pin
14, it also has the option of being powered via an external 5V power adapter.
The receiver, however, requires an external +5V AC/DC power adapter.