Filter
Top Products
4
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Figure 11
Step 20. Bundle the new cables and the A/V cables together and wrap
with masking tape, or rout them through the flexible conduit if provided.
See Figures 11 and 12
.
Step 21. Tack the wire harness into the side frame and replace the wire
harness shield, if provided (
see Figure 13
).
Figure 12
Figure 13
New Cables Routed
Figure 10
Push The Remote Receiver Into The Rectangular Slot
Bundle New Cables And A/V Cables Together With Tape
Tack Wire Harness Behind Side Frame