LG Electronics 15LW1RA Flat Panel Television User Manual


 
Playing Music
Playing music using a playlist
You can create a playlist that contains your favorite music and use it on the wireless TV. (See next page)
Stop/Pause
STOP: Press the STOP button to stop playback of
the current music file.
PAUSE: Press the PAUSE button to temporarily
stop music playback. To resume playback,
press the PLAY button.
Repeat/Clear
Press the AUDIO button to play back several music
files in the playlist or selected file repetitively.
For repeated playback
Random/Clear
Press the button to play back the music files randomly.
For random playback
At the wireless TV
At your computer
57
Downloaded From TV-Manual.com Manuals
Using Media Library
Playing music
1
You can create a playlist that contains your favorite music and use it on the wireless TV. (See next page)
Select the
[Playlist] icon.
Click the
[New]
button in the
Playlist window.
A new playlist
will be created.
1. Select a [PLAYLIST].
2. Select the music file to play
back.
3. Click the
[Select] button.
The music file is added to the playlist.
Click the
[Save] button to save it.
(The file will be saved in My Computer -> C: -> Program Files -> LG
Media Library -> Playlist by default.)
You can add the contents of the
selected playlist to the currently
edited playlist.
Select a folder in the
Shared folder.
Then, the music file
list will be displayed at
the bottom section.
(No folder will appear
if no folder is shared in
the Music menu.)
If the folder is not
shared, click the [File
Search] button and
select the folder to
share.
* You can add the
music files in the
Shared folder only
to the playlist.
2
3
4
5
You can save the selected list in a
playlist as a different file name.
At computer : Creating a playlist
- You must not omit the file extension
(*.pls) when naming a playlist file.
- File extensions other than the specified
one (*.pls) are not supported.
58
1
2
3
Downloaded From TV-Manual.com Manuals
59
Playing Movies
Select the movie file to play back and press the
button or PLAY button.
* Use the MARK button to select multiple files.
* Selecting several consecutive files at a time:
Selection button: Selection cancel button :
Press the STOP button to move to the View Movie
List window during playback.
* When playback is finished, the View Movie List window
will be automatically displayed.
* If you exit to the Home screen and return while playing
back the movie file or playback is stopped.
If you select the movie file that was being played, the
WHERE TO PLAY window will appear.
(Some format does not display this window.)
Previous Position: Resumes playback from the interrupted
position.
Initial Position: Starts from the beginning.
Click!
Click!
Playing back the movie
You can play back the video files in the folder shared by the Media Server. (See page 53 Sharing files in the Media Server)
Moving up
Select the icon using the movement buttons on the remote control to move to
the upper folder.
Page Up/Down
You can move up/down the list by page using the CH/PAGE button on the
remote control.
Arrange List
You can arrange the name of the folder or movie files by ascending/descending
order using the EZ VIDEO button on the remote control.
Back to Home Media
You can move to the home screen using the HOME button on the remote control.
Caption setting
You can change the caption/text setting in the movie list screen using the button
on the remote control. Press the button on the remote control to hide/show (toggle)
the caption/text while playing back the movie file.
1
2
3
4
5
View movie list
Supported format: MPEG-1 VCD, MPEG-2 (SD class),
WMV9 (SD class), AVI.
* For more details, see the next page.
1
2
Home Media
screen
Video may be lost when playing the
movie or executing FF/REW,
depending on the network condition.
At the wireless TV : Playing Movies
Downloaded From TV-Manual.com Manuals
Using Media Library
Playing movies
Playing previous/next movie file
Stop/Pause
FF/REWIND
1 42
3
View file name You can check the name of the movie file.
View file property You can check the movie file format.
Sound amplification You can amplify the sound by properly adjusting the
default value.
(Press the AUDIO button on the remote control.)
X1: Default volume, X2: 2 times, X3: 3 times
View file playback time You can check the file playback time and all playback
time.
Press the button to play back the previous movie file, or press the
button to play back the next one.
STOP: Press the STOP button to stop playback of the current file.
PAUSE: Press the PAUSE button to temporarily stop playback.
To resume playback, press the
PLAY button.
Moves the playback position of the current movie file forward or backward by
certain interval.
FF : Moves forward as much as 2% of the entire file playback length
(based on 1 hour).
REWIND : Moves backward as much as 2% of the entire file playback
length (based on 1 hour).
* Movement position can differ according to the file size.
(Not available for some formats)
1
2
3
4
The wireless TV supports the following movie file formats.
MPEG-1 VCD (*.mpg, *.mpe, *.mpeg, *.dat, *.m1v)
MPEG-2 (SD class) (*.mpg, *.mpe, *.mpeg, *.vob,
*.m2v)
WMV9 (SD class) (*.wmv)
AVI (*.avi)
Audio codec
- MPEG1 Layer I, II, III
- Dolby Digital (AC3)
- DTS
- Windows Media Audio (WMA9)
Video codec
- MPEG-4 (1/2/3)
- Divx 3.11/4/5
- XVID
- WMV9
Supported sub-title file format
Sami (*.smi)
* The sub-title name must
be same as that of the
movie file to be displayed
the sub-title on the TV.
60
Downloaded From TV-Manual.com Manuals
61
Changing Settings
Brightness
SlideShow
Browse From
Select Network
WEP key
Network
Select Media
Server
Adjusts brightness of the screen. Larger values make the screen brighter.
Adjusts the slide show interval.
Slow (15 seconds) -> Normal (10 seconds) -> Fast (5 seconds)
Press the button after setting.
Selects the screen when the TV/MEDIA button is pressed on the remote control.
Home: Home screen appears when switching from TV to Media Browser.
Last mode: Starts from the last screen used.
Press the button after setting.
Changes or selects the SSID(network name) of the wireless LAN card (or Access Point(AP)).
Select the wireless network ID to change using the left/right button on the remote control.
Encryption for security. Assigns the WEP key (password) for wireless LAN card (or Access Point(AP))
setting.
Not in Use: WEP key will not be used.
64bit/128bit: If you apply 64 bits or 128 bits and press the button, the virtual keyboard screen
(5-1) will appear and lets you enter the password.
Sets the IP Address, Subnet Mask, and Gateway.
Manual: You should manually input IP Address, Subnet mask and Gateway value.
Automatic: IP Address, Subnet mask and Gateway value will be automatically filled in by the DHCP
server. (Nothing will appear on the Setting window.)
Specify the computer that contains the media files to use.
When the Setting Confirmation window appear after setting, press the button.
* If you press the HOME button on the remote control when changing the Select Network, WEP key and Network, the
SEARCH FAILURE windows appear if you select Exit from the Setting menu. Press the button again to enter into the
Setting menu again.
1
2
3
4
5
6
7
1
2
3
4
7
5-1
Virtual keyboard
Input the number or the character you
want, using the movement buttons on
the remote control.
5
6
Changing Settings
Downloaded From TV-Manual.com Manuals
Note
Check before reporting malfunction
62
When suspecting a malfunction, check again if the following occur. It may not necessarily be a malfunction.
Abnormal Adjustment
Symptoms
Screen appears a little late after turn-
ing the wireless TV on.
Screen appears but no sound is
heard.
Remote control does not work.
Vertical and horizontal lines as well as
net pattern appear on the screen
instantly, and the screen shakes.
Sreen of all channels or the specific
channel is overlapped or the line
Color is not displaying properly.
A strange sound is heard from the
wireless TV.
This phenomenon occurs because of image elimination processing to hide the image noise on the screen when
the power is turned on. It is not a malfunction.
The screen may appear a little late depending on the network status.
Check the program of other broadcasting service provider.
Press the Volume Up button among Volume Up/Down button.
Check whether there is any obstacle between remote control and wireless TV.
Check whether the battery is inserted with correct polarity.
The battery can be used up. Replace two batteries with new one. (Page 20)
Caused by strong electromagnetic interference from a high-frequency electric device or other TV. Possibly
caused by a cordless phone, hair dryer, electric drill, etc.
Adjust the direction. i.e., Re-orient the antenna to the broadcasting station.
Check the program of other broadcasting service provider.
Select the color and adjust it using the Volume Up button. (Page 33)
Snapping sound before and after watching TV originates from surrounding environment change because of the
characteristics of the plastic products. It is not a malfunction.
Take the following measures
Q
A
A
A
A
A
A
A
A
A
A
A
A
Q
Q
Q
Q
Q
Q
Downloaded From TV-Manual.com Manuals
When suspecting a malfunction, check again if the following occur. It may not necessarily be a malfunction.
Check before reporting malfunction
Symptoms
Nothing appears on the screen.
No sound is heard.
The screen becomes darker when I
separate a DC adapter while the bat-
tery is mounted.
The screen blinks when setting the
screen automatically.
Check whether the battery or the DC adaptor is connected.
If you find that the battery power LED flashes in yellow color when you press the power button, the remaining
battery amount is insufficient. Connect the DC adaptor in this case.
Screen brightness is automatically adjusted for power saving. If the DC adaptor is connected, the previous set-
ting will be restored.
Take the following measures
Q
A
A
A
A
A
A
A
A
Screen brightness is adjusted twice at the time of automatic screen adjustment. It is not a malfunction.
A
Adjust the volume.
Check whether the Mutefunction is set in the Volume setting menu.
If no sound is heard from the headset, check whether the headset jack is properly connected to the wireless TV.
If the headset is equipped with the volume control function, sound balance setting in the wireless TV may not
work properly.
When listening to the music from the wireless TV through the computer, music playback can be interrupted from
time to time depending on the wireless network environment.
Q
Q
Q
Abnormal Adjustment
63
Downloaded From TV-Manual.com Manuals
64
Note
Check before reporting malfunction
When suspecting a malfunction, check again if the following occur. It may not necessarily be a malfunction.
Symptoms Take the following measures
When I use the Media Browser,
the Check the PC status first. If
you want to change the settings,
press the button. message
appears.
Check whether the network setting (SSID(network name), WEP key and so on) is correct in the wireless TV.
Check whether the computer is turned on.
Check whether the program (Media Library) is properly installed in the computer.
Check whether the wireless LAN card (or, Access Point (AP)) is installed properly and it can be used.
Check whether the distance from wireless TV and computer is too far away.
Check whether the Media Library is allocated to the wireless LAN card (or, Access Point(AP)).
Check whether the Turn off HDDoption is set on in the power saving mode of the computer.
Check the wireless Access Point(AP) setting. If the SSID(network name) is in the hiding mode, it cannot be used.
Q
A
A
A
A
A
A
A
A
Check whether the SSID(network name) in Select Network of the
wireless TV setting is identical to that of the computer wireless network.
If it is different, set the SSID(network name) of the wireless TV as
that of the computer. (See page 46)
The SSID(network name) in Select Network of the wireless TV set-
ting is set to LGMEDIA by default. But, it can be changed using the
wireless network SSID(network name) set in the computer.
At this time, the wireless LAN card (or, Access Point(AP)) setting in
the computer should be Network between Computers(Ad-hoc or
peer-to-peer). See the wireless LAN card (or, Access Point(AP))
users manual.
If the wireless LAN card (or, Access Point(AP) is not allocated, run
Re-start the service with a different IP and select the network installed with
the wireless LAN card (or, Access Point(AP)) and then activate the service.
Abnormal Adjustment
Downloaded From TV-Manual.com Manuals
65
Check again if the following phenomenon occurs, which you presume that it is malfunction. It may not be malfunction indeed.
Symptoms Take the following measures
TV screen display is interrupted from
time to time, or not displayed properly.
Check whether the power of the transmission unit is turned on.
First, check whether the power LED in the transmission unit flashes in red color. Then, move the location of the
transmission unit to the center of the house or the position where you watch the TV most frequently.
Check whether the distance from wireless TV and computer is too far away.
Reception sensitivity differs according to the direction of the wireless TV and wireless
transmission unit. Turn the front side of the wireless transmission unit towards the wireless TV.
Reception sensitivity of the wireless TV also depends on the direction. Find the optimal
direction and location inside the house and install the wireless TV.
Do not attach the wireless transmission unit on the bookshelf or the wall to extend the wireless
network coverage.
If the TV is turned on properly but not the TV broadcasting, check TV antenna connection and set the channel using
the
[Ez Scan] function. (See page 30.)
Q
A
A
A
A
A
A
A
Wireless transmission unit
Front
Check before reporting malfunction
Abnormal Adjustment
Downloaded From TV-Manual.com Manuals
66
Note
Product Specification
The product specification is subject to change without notice for product improvement.
Display Device
Television Standard
Receiving Channel
Input Connector
Power
Power Consumption
External Antenna Impedance
Sound Output
External Port
Dimension
Size
(Width x Length x Height)
Weight
(excluding package)
Wireless TV (4.0 Kg)
Wireless Transmission Unit (1.6 Kg)
15
LCD Panel
NTSC
VHF 2~13 channels, UHF 14~69 channels, CATV 01~125 channels
S-Video, Video, TV
Wireless TV: DC 16V 3.0A
Wireless Transmission Unit: DC 16V 1.0A
Wireless TV: 40W
Wireless Transmission Unit: 15W
75
1.5W+1.5W
See pages 23~27.
Battery: 0.4 Kg
Wireless TV (4.0 Kg) + Mounting type stand (1.0 Kg)
454 mm 454 mm
380 mm
201 mm
57 mm
303 mm
245 mm
56 mm
110 mm
228 mm
243 mm
Downloaded From TV-Manual.com Manuals
67
MEMO
Downloaded From TV-Manual.com ManualsDownloaded From TV-Manual.com Manuals