Filter
Top Products
21
ENGENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system (This feature is
not available for all models.)
y
Image shown may differ from your TV.
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit
http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
Mounting on a wall
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
Securing the TV to a wall
y
Image shown may differ from your TV.
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
y
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
NOTE
y
Make sure that children do not climb on
or hang on the TV.
CAUTION
10 cm
10 cm
10 cm
10 cm
Downloaded From TV-Manual.com Manuals