Filter
Top Products
Operation
C ha nne!
- For Auto program to work, the programming _urce must be connected to the TV and the TV must
receiving programming signals either over-the-air or from a cable-type service providen
1. Press the MENU bu_tonand then use A / T button to se{ect
t_ __ menu.
2,,Press the i_ button and then use & / T button to select
3. Press the I_ button to begin the channel search.
* Wait for auto program to complete the channel search
cycle before chasing a channel. The TV scans for
over-the-air channels and then channels provided by a
cable ser,,ice.
NOTES
• When the channel search is complete, use the A / T buttons to review the memorized channels.
• If you press the MENU or EXIT button in auto programming, the function will stop and only c_nnels pro-
gramming up to that time will remain.
• Auto program function can memorize only the channels which are being received at that time.
- You can manually include or erase individual channels.
1. Press the MENU button and then we A / T button to select the
CHA,NN1_ menu.
2. Press the I_ button and then use ,k / V button to select
3. Press the I_ button and then use < / I_ button to sel_t a
channel you want to add to memory or erase.
4. Press the T button and then use < / I_ button to select
Memo_ (add) or Er_ (delete).
5. Press the ENTER button to save. The current channel is
added to Memory or Erased from the channel list.
The currentchannel number_ dispAyed.
1. Press the MENU button and then me ,L / T button to select the
menu.
2. Press the I_ button and then use A / T button to select
3. Press the T button to select rme and then use <1 / I_ but-
ton to adjust frequency from -50 to 50.
4. Press the ENTER button to save.
18
The current frequency is dispiayed.