LG Electronics 32/37/42/47/55LE75** TV Antenna User Manual


 
137
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can
calibrate the screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an
example.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not
applied.
Picture Wizard
With Picture Wizard, you can adjust the picture quality of the
original image.
Next
Previous
Press the MENU/EXIT button to return to normal TV viewing.
Press the BACK button to move to the previous menu screen.
If you stop the setting before
the final stage, the changes
will not be applied
The adjustment value is
saved to Expert1.
• Once the Picture Wizard sets
the image quality, the Energy
Saving is changed into Off.
If the picture quality setting
of Expert1 is changed, use
the Picture Reset before
entering the Picture Wizard
to reset the picture quality
setting.
Standard : mode to set stan-
dard picture quality.
Preferred : mode to set user
preferred picture quality rath-
er than standard picture.
1
Select PICTURE.
2
Select Picture Wizard.
3
Adjust Standard(Black Level, White Level,
Tint, Colour, Horizontal Sharpness, Vertical
Sharpness, Backlight (LCD TV/LED LCD TV
only)) or Preferred(Black Level, White Level,
T
int, Colour, Sharpness, Dynamic Contrast,
Colour Temperature, Backlight (LCD TV/LED
LCD TV
only)).
4
Select input source to apply the settings.
5
OK
Move
Aspect Ratio : 16:9
Picture Wizard
Energy Saving : Off
Picture Mode : Standard
Backlight 70
Contrast 100
Brightness 50
Sh
•Sh
•Sh
Sh
arpn
arpn
arpn
ess
ess
ess
0
70
70
70
PICTURE
Picture Wizard
Downloaded From TV-Manual.com Manuals