LG Electronics 32/37/42/47/55LE75** TV Antenna User Manual


 
5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A EURO SCART CABLE
Scart
Input Output
Video Audio RGB Video, Audio
AV1
OOO
Analogue TV, Digital TV
NOTE
Any Euro scart cable used must be signal shielded.
When watching digital TV in 3D imaging mode, monitor out signals cannot be output through the
SCART cable. (Only 42/47LX6
***
, 47/55LX9
***
, 50/60PX9
***
)
If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out
signals cannot be output through the SCART cable, and the recording cannot be performed.
(Only 42/47LX6
***
, 47/55LX9
***
, 50/60PX9
***
)
TV Out : Outputs Analogue TV
or Digital TV signals.
1
Connect the Euro scart socket of the external
equipment (DVD, VCR, etc.) to the AV1 Euro
scart socket on the TV.
2
Turn on the external equipment.
(Refer to the external equipment's manual for
operating instructions.)
3
Select AV1 input source using the INPUT but-
ton on the remote control.
1
Output Type
Current
input mode
AV1
(TV Out)
AV1
(When DTV scheduled recording is in
progress using recording equipment.)
Digital TV Digital TV
O
Analogue TV, AV Analogue TV
O
(The input mode is converted to DTV.)
Component/RGB Analogue TV
HDMI X X
Downloaded From TV-Manual.com Manuals