Filter
Top Products
5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A EURO SCART CABLE
Scart
Input Output
Video Audio RGB Video, Audio
AV1
OOO
Analogue TV, Digital TV
NOTE
► Any Euro scart cable used must be signal shielded.
►When watching digital TV in 3D imaging mode, monitor out signals cannot be output through the
SCART cable. (Only 42/47LX6
***
, 47/55LX9
***
, 50/60PX9
***
)
► If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out
signals cannot be output through the SCART cable, and the recording cannot be performed.
(Only 42/47LX6
***
, 47/55LX9
***
, 50/60PX9
***
)
► TV Out : Outputs Analogue TV
or Digital TV signals.
1
Connect the Euro scart socket of the external
equipment (DVD, VCR, etc.) to the AV1 Euro
scart socket on the TV.
2
Turn on the external equipment.
(Refer to the external equipment's manual for
operating instructions.)
3
Select AV1 input source using the INPUT but-
ton on the remote control.
1
Output Type
Current
input mode
AV1
(TV Out)
AV1
(When DTV scheduled recording is in
progress using recording equipment.)
Digital TV Digital TV
O
Analogue TV, AV Analogue TV
O
(The input mode is converted to DTV.)
Component/RGB Analogue TV
HDMI X X
Downloaded From TV-Manual.com Manuals