Filter
Top Products
46
206-4207
1. Plug a USB memory device into the USB IN port on the TV.
2. Press MENU on the Installer Remote to display the TV setup
menus (TV is in Pass-through Mode) or the Function Menu (TV is
already in FTG Mode).
3. Use the arrow navigation keys to select/highlight either the Option
menu icon from the TV setup menus or the Lock menu icon from
the Function Menu. Then, press the number “7” key a total of seven
times to display the USB Download Menu.
4. To gain access to the Learn From TV options in the USB Down-
load Menu, key in the password used to enter the Installer Menu
(Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (TLX), and
then press OK (Enter).
6. To differentiate this .tlx le from others, you can use the Up/Down
arrow keys to change the last ve digits of the lename. Press OK
(Enter) when you are ready to initiate Learning.
The TV will show Learning completion progress in a new window.
Do NOT remove the USB device until Learning is complete. When
Learning is complete, the USB Download Menu will reappear on
screen.
7. When you are nished, remove the USB memory device.
Note: It is highly recommended that you open this FTG
Configuration file in the FTG File Manager—BEFORE transferring
(Teaching) the file to any TVs—to verify FTG Channel Map and
FTG Installer Menu settings and enable Pro:Idiom decryption by
marking Encrypted channels. This will also enable you to confirm
channels and add channel attributes, labels, etc.
Learning an FTG Conguration File from a TV
To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FTG Configuration
file using the FTG File Manager as described on pages 43 to 44. However, if necessary, this option enables
you to save (Learn) an FTG Configuration file from an LQ630H or CQ610H TV to a USB memory device.
Notes: • The option to save (Learn) an FTG Conguration le from a TV may be desirable or required
in either of the following situations:
− If you want to save customized TV setup menu settings to the FTG Conguration le
(in addition to the FTG Channel Map and FTG Installer Menu settings).
− If you do not know the RF channels at the site.
• If the TV is NOT already in FTG Mode, you may need to perform some manual conguration
on the TV before you start this procedure (see “Optional Manual Conguration / TV Setup”
on following page).
FTG Mode via CPU (Cont.)
Send To USB (USB Port1)
Select the le name and press OK to start
xxLQ630H-UA00005.TLX
-
Previous
Enter
►
►
UPDATING...
Do not unplug!
25%
Learn From TV
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous Enter