Filter
Top Products
24
CONNECTIONS & SETUP
CONNECTIONS & SETUP
Horizontal Vertical
Frequency(KHz) Frequency(Hz)
31.469 59.94
37.500 75.00
31.469 70.08
37.879 60.31
46.875 75.00
49.725 74.55
48.363 60.00
56.476 70.06
60.023 75.02
47.693 59.99
47.700 60.00
47.700 60.00
Resolution
640x480
720x400
800x600
832x624
1024x768
1280x768
1360x768
1366x768
Supported Display Resolution (RGB[PC]/HDMI [PC] mode)
NOTE
!
To enjoy vivid picture and sound, connect a PC to
the set.
Avoid keeping a fixed image on the set’s screen
for a long period of time. The fixed image may
become permanently imprinted on the screen;
use a screen saver when possible.
Connect PC to the RGB INPUT(PC INPUT) port
of the set; change the resolution output of PC
accordingly.
There might be a noise according to some reso-
lution, vertical pattern, contrast or brightness in
PC mode. Then change the PC mode into other
resolution or change the refresh rate into other
rate or adjust the brightness and contrast on the
menu until the picture is clean. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult it to the
manufacturer of the PC graphic card.
The synchronization input form for Horizontal
and Vertical frequencies is separate.
We recommend using 1360x768, 60Hz for the PC
mode, they provide the best picture quality.
If the resolution of PC is over UXGA, there will be
no picture on the set.
Connect the audio cable from the PC to the
Audio input on the set. (Audio cables are not
included with the set).
When you use too long RGB-PC cable, there
might be a noise on the screen. We recommend
using under 5m of the cable. It provides the best
picture quality.
44
55
1
2
3
6
7
8
9
Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals