Filter
Top Products
76
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
NICAM Reception (In Analogue Mode Only)
When NICAM MONO is received, you can select NICAM MONO or FM MONO.
When NICAM STEREO is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
When NICAM DUAL is received, you can select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or MONO.
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near
Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received by pressing the I/II
button repeatedly.
Speaker Sound Output Selection
In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and right
loudspeakers.
Repeatedly press the I/II button to select the sound output.
L+R
::
Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R
input is sent to the right loud speaker.
L+L
::
Audio signal from audio L input is sent to left and right loud speakers.
R+R
::
Audio signal from audio R input is sent to left and right loud speakers.
1
2
3
Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals