Filter
Top Products
28 ASSEMBLINGANDPREPARING
Mounting on a table
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inch) (minimum) space from
the wall for proper ventilation.
(For 32LW5700, 42LK530, 42LK550)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
2 Connect the power cord to a wall outlet.
-_ CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
r--_ WARNING
|_ To prevent TV from falling over, the TV
should be securely attached to the floor/wall
| per installation instructions. Tipping, shaking,
L or rocking the TV may cause injury.
NOTE
Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.
20°
Downloaded From TV-Manual.com Manuals