Filter
Top Products
48
206-4232
FTG Mode via CPU (Cont.)
Learn FTG Conguration
1. Turn ON the TV, and then insert a USB memory device into the USB IN port on
the TV.
2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus
(TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
3. Use the arrow navigation keys to select/highlight either the Option menu icon
from the TV setup menus or the Lock menu icon from the Function Menu. Then,
press the number “7” key a total of seven times to display the USB Download
Menu.
4. To gain access to the Learn From TV options in the USB Download Menu, key
in the password used to access the Installer Menu (Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (TLX), and then press
OK.
6. To differentiate this .tlx le from others, you can use the Up/Down arrow keys
to change the last ve digits of the lename. Press OK when you are ready to
initiate Learning.
Learning status will be shown on a progress bar in a new window. Do NOT
remove the USB device until Learning is complete. When the Learning process
is complete, the USB Download Menu will reappear on the screen.
7. When Learning is done, press on the Installer Remote to exit the USB Down-
load Menu, and remove the USB memory device.
Note: It is highly recommended that you open this FTG Configuration
file in the FTG File Manager—BEFORE transferring (Teaching) the file to
any TVs—to verify FTG Channel Map and FTG Installer Menu settings
and enable Pro:Idiom decryption by marking Encrypted channels. This
will also enable you to confirm channels and add channel attributes,
labels, etc.
Learning FTG Conguration from a TV
To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FTG
Configuration file using the FTG File Manager as described on pages 45 to 46. However, if
necessary, this option enables you to save (Learn) an FTG Configuration file from an LP645H TV
to a USB memory device.
The option to save (Learn) an FTG Conguration le from a TV may be desirable or required in
either of the following situations:
• If you want to save customized TV setup menu settings to the FTG Conguration le (in addition
to the FTG Channel Map and FTG Installer Menu settings).
• If you do not know the RF channels at the site.
Before You Begin
• If the TV is NOT already in FTG Mode, you may need to perform some manual conguration on the
TV before you start this procedure (see “Optional Manual Conguration / TV Setup” on next page).
• If you intend to use the TV Zoning feature, make sure to assign the appropriate TV Zone # as
described in Reference section, “Using the TV Zoning Feature,” BEFORE continuing with the
procedure below.
Learn From TV (TLX)
Select the le name and press OK to start
xxLP645H-UA00005.TLX
-
►
►
UPDATING...
Do not unplug!
25%
Learn From TV
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous OK
Previous OK