Filter
Top Products
DLP Personal Projector
5
External Control Panel
1. Power indicator
The indicator shows green for a normal
state. When the projector is in Standby
mode, it shows orange toggle. See
"Operative Information" on page 26 for
more detailed information.
2. Temp indicator
The Temp indicator shows red or flashed
red when the system temperature is too
high or has fan problems, which may
occur if the projector is operated
improperly. See "Operative Information"
on page 26 for more detailed information.
3. Lamp Indicator
The Lamp Indicator will light up when the
lamp needs service, cooling or
replacement. See “Lamp Information” on
page 25 and "Operative Information" on
page 26 for more detailed information.
4. POWER
Press and hold the POWER key for 1
second to turn on or off the projector.
5. MENU / EXIT
Brings the OSD menu or leaves the OSD
menu.
6. SOURCE
Selects signal sources from among
Analog RGB, DVI, YP
bPr, S-Video and
Composite Video.
7. AUTO
Automatically determines the suitable
frequency and clock for current received
signals. The auto adjustment function will
not affect the current brightness and
colors settings.
8. BLANK
Uses BLANK to hide the screen image.
You can press BLANK again or RETURN
to bring the image back.
When this function is activated, the sound
will not stop, unless you press MUTE.
9. KEYSTONE - 10. KEYSTONE +
Presses KEYSTONE - to correct a image
that is wider at the top. Presses
KEYSTONE + to correct a image that is
wider at the bottom.
9. Left < 10. Right >
11. Up ^ 12. Down v
When the On-Screen Menu system is
activated, the four buttons help you
navigate among choices and settings in
the menus and sub-menus.
AUTO BLANK
SOURCE
KEYSTONE
-
KEYSTONE
+
POWER
MENU
/EXIT
2. Temp Indicator
3. Lamp Indicator
4. POWER
5. MENU / EXIT
9. KEYSTONE - / Left
10.KEYSTONE + / Right
6. SOURCE
8. BLANK
11. Up
7. AUTO
12. DOWN
1. Power Indicator