Filter
Top Products
Before Operation - VCR part
13
PREPARATION
Setting the clock Manually
The clock in your VCR controls time and date
settings for your VCR.
Your VCR’s clock is checked continually against
Teletext information broadcast by most TV stations.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a Teletext
signal. If the broadcast signal is weak the clock
will not be set and will require setting manually.
11
Press i.
Press 1 or 2 to select TIME DATE.
Press OK.
The auto adjust mode can be set to “OFF” by pressing
D or E if you want to set the time manually.
Press OK.
22
Use the numbered buttons on the remote control
to alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
When entering singles numbers a 0 must be added
first, for example 1 must be entered as 01, 2 as 02
etc.
The day of the week will appear automatically when
you enter the date.
33
If you make a mistake press 1 or 2 and enter the
correct details.
44
Press i.
To set the colour system
Your VCR is equipped with dual colour standard,
you can play back a tape in PAL and MESECAM.
During playback your VCR detects the colour sys-
tem automatically.
It there are colour problem please select the
colour system manually.
11
Press i.
22
The main menu will appear on the TV screen.
33
Press 1 or 2 to select the SYSTEM and press OK.
44
Press 3 or 4 to select according to the COLOUR
system used.
AUTO: automatic colour selection,
PAL: PAL recordings
MESECAM: MESECAM recordings.
55
Press i to remove the menus from the TV screen.
HH MM DD MM YY
:..- -
- -
- - - -
- - - - -
i
12
TIME
DATE
REC
i
Pr-12
ACMS
P
SET
R
12
TIME
DATE
SYS-
TEM
SYS-
TEM
Dr.
VCR
OSD
ON
OFF
OSD
f
16:9
4:3
OPR
NIC
AUTO
PAL
MESECAM
HH MM DD MM YY
:..00 1 01 02 TUE
i
12
TIME
DATE
8
AUTO ADJUST
- -
i
12
TIME
DATE
ON:
OK