LG Electronics DVD-3350E DVD Player User Manual


 
INITIAL SETTINGS PAGE 39
Selecting Digital Audio Output
Each DVD disc has a variety of audio output
options. Set the players Digital Audio Output
according to the type of audio system you use.
PLAY
POWER
STOP
SKIP
SKIP
123
456
789
0
RETURN
3D SOUND
PROGRAM
TITLE MENUCLEAR
AUDIO SUBTITLE ANGLE MARKER-SEARCH
REPEAT A-B RANDOM
ZOOM
REV FWD
SLOW/SCAN
OPEN/CLOSE
PAUSE
/STEP
SELECT
/ENTER
SETUP
GUI DISPLAY
1, 2
2
At the SETUP screen, press
DD
/
EE
to select
Digital Audio Output and press
GG
.
Press
DD
/
EE
to select the desired output and
press SELECT/ENTER.
DOLBY DIGITAL/PCM:
Select DOLBY DIGITAL/PCM if
an active digital output is supplied to a Dolby Digital decoder,
(or an amplifier or other equipment with Dolby Digital
decoder).
Stream/PCM: Select Stream/PCM if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder and
MPEG decoder.
PCM: Select PCM if an active digital output is
supplied to an amplifier or other equipment with linear PCM
only (or MD recorder or DAT deck).
2
1
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
Disc Audio
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
Disc Audio
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
Notes
Playback
Disc
96 kHz
Linear PCM
DVD
DTS DVD
Dolby Digital
DVD
MPEG DVD
Audio CD
DTS Audio CD
Stream/PCM
PCM
DTS bit Stream
Dolby Digital
bit Stream
MPEG bit Stream
PCM
DTS bit Stream
OUTPUT
Dolby Digital/
PCM
PCM
Not Output
Dolby Digital
bit Stream
PCM
PCM
DTS bit Stream
PCM only
PCM
Not Output
PCM
PCM
PCM
DTS bit Stream
When you are not using the players digital audio output, dont
select any of the options.
If an active digital audio output signal is supplied to a receiver or
other equipment without a corresponding digital decoding capa-
bility, a very loud noise may be produced which could
permanently damage the speakers.
The DTS DVD disc sound is played back only when the DVD
player is connected to a receiver with a DTS decoder.