Selecting Speaker
At the SETUP screen, press
DD
/
EE
to select
“5.1 Speaker Setup” and press
GG
.
Press
FF
/
GG
to select the desired speaker and
press
DD
/
EE
/
FF
/
GG
to adjust options.
Volume: Press F/G to adjust the output level of
selected speaker. (-6dB ~ 0dB)
Size: Press F/G to set a mode. (Large, Small, None)
• If you have connected the system to a speaker
with low frequency of 100Hz or below, select
“Large”
• If you have connected the system to a speaker
without low frequency of 100Hz or below, select
“Small” But if you haven’t connected to sub
woofer, always select “Large” of Front Speaker
(L/R).
• When you don’t connect to speaker, select “None”.
• Front L/R speaker’s size can be selected to Large”
or “Small”.
• If Front L/R speaker’s size is selected to “Small”,
Rear and Centre speaker’s size can be selected to
“Small” or “None”, and Sub woofer speaker’s size
can be selected only to “Large”.
Delay: Press
F/G to customize the sound to conform
to the acoustics of your room by adding a delay
effect to the sound of the Centre Speaker and
Surround Speaker.
• When 5.1CH Surround is played, you can enjoy
the best sound if the distance between you and
each speaker is same. You can set Delay time in
the Centre/Surround Speaker to customize the
sound to to the acoustic of your room.
•
Setting Centre Speaker
If the distance of DC is
equal to or longer than
the D
F in the left figure,
set the mode as 0ms.
Otherwise, change the
setting according to the
table below.
(A) = D
F - DC
Distance of (A)(cm) Setting(ms)
34 1
68 2
102 3
136 4
170 5
• Setting Rear Surround Speaker
If the distance of D
F is equal to the distance of DS
in the above, set the mode as 0ms. Otherwise,
change the setting according to the table below.
(B) = D
F - DS
Distance of (B)(cm) Setting(ms)
170 5
340 10
510 15
Test : Press SELECT/ENTER to test signals of each
speaker. Adjust Volume to match to the volume of
test signals memorized in the system.
•
Front (L) → Front (R) → Centre → Rear (L) → Rear (R)
Return: Press SELECT/ENTER to return to the
previous menu screen.
❍
Do not place the centre or rear speakers farther
away from the listening position than the front
speakers.
❍
The test tone does not output from the subwoofer.
2
1
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
Disc Audio
Front L/R
Volume: dB
Size : Large
Delay : ms
Test
Return
R R
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
Disc Audio
Rear L/R
Volume: 0 dB
Size : Large
Delay : 2 ms
Test
Return
R R
Select the speaker to adjust the audio output
mode of the speaker.
STOP
123
456
789
0
RETURN
3D SOUND
PROGRAM
TITLE MENUCLEAR
OPEN/CLOSE
PAUSE
/STEP
SELECT
/ENTER
SETUP
GUI DISPLAY
1, 2
1, 2
Note
L
SL SR
R
C
D
C
DF
DS
(A)
(B)
SW
Front Speaker (L/R)
Centre Speaker
Sub Woofer
Rear Surround
Speaker (L/R)
PAGE 40 INITIAL SETTINGS