Filter
Top Products
32
On-Screen Display - DVD
On-Screen Display - DVD
You can display the general playback status on the
TV screen. Some items can be changed using the
menu. To use the on-screen display:
1. Press DISPLAY during playback.
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
The items displayed differ depending on the disc
type or playing status.
For details about each item, see the pages in
parentheses.
• [Title]: Current title (or track) number/total
number of titles (or tracks) (page 29)
• [Chapter]: Current chapter number/total num-
ber of chapters (page 29)
• [Time]: Elapsed playing time (page 30)
• [Audio]: Selected audio language (DVD
VIDEO only) or audio channel (page 31)
• [Subtitle]: Selected subtitle (page 31)
• [Angle]: Selected angle/total number of angles
(page 31)
• [Sound]: Selected sound mode (page 31)
Notes:
• Some discs may not provide all of the features shown
below.
• If no button is pressed for 10 seconds, the on-screen
display disappears.
• If is displayed, action prohibited or not available.
Maintenance and Service
Maintenance and Service
Refer to the information in this chapter before con-
tacting a service technician.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide
spray near the unit.
• Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the sur-
faces are extremely dirty, use a soft cloth lightly mois-
tened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.