Filter
Top Products
DTV MENU OPERATION
21
Setup Menu Options
EZ Scan (Channel Search)
Automatically finds all channels (digital) available using the ‘Ant In’ source,
and stores all the active channels found on the channel list. Inactive or weak
channels may not appear on the list. In that case, add missing channels
manually with the Ch. edit menu. The channel list created here can be seen
in the Ch. Edit menu.
11
Press MENU to display the on-screen menu.
22
Select the SETUP menu using
33
/
44
then press (SELECT) or
22
to
move to the second level.
33
Select EZ Scan using
33
/
44
then press (SELECT).
44
Select the signal source (DTV or CADTV).
DTV is for over-the-air antenna reception.
CADTV is for cable subscribers.
otes
• If you select CADTV, select a cable band (STD, HRC, or IRC). Ask your
cable service provider about cable band.
• In most cases you can search channels correctly by selecting STD cable
band. Try the other bands if you cannot find any channels.
• Some scrambled channels may not be stored.
55
Press (SELECT).
The channel search process begins. You can stop the process by press-
ing (SELECT) or MENU.
66
When channel search is complete, the lowest channel number
found appears on the TV screen.