Filter
Top Products
Operating38
Operating
4
Playing a DVD
Playback Setup
Before using the remote control, press the DVD
button to select the device to be operated.
Turn the TV on and select the video input source
connected to the Recorder.
Audio system: Turn the audio system on and select
the input source connected to the Recorder.
1. Press OPEN/CLOSE (
B
) to open the disc tray.
2. Load your chosen disc in the tray, with the
playback side down.
3. Press OPEN/CLOSE (
B
) to close the tray.
READ appears on the display window, and
playback starts automatically. If playback does
not start, press
z
(PLAY).
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
y
The menu screen may be displayed rst
after loading a DVD which contains a menu.
y
Use the
a/d/s/w
buttons to select the
title/chapter you want to view, then press
ENTER (
b
) to start playback.
y
Press TITLE or MENU/LIST to return to the
menu screen.
y
If Parental Control is set and the disc is not
within the Rating settings (not authorized),
the 4-digit code must be entered and/
or the disc must be authorized (see “DVD
Rating”, on page 29).
y
DVDs may have a Region Code. Your
recorder will not play discs that have a
region code dierent from your recorder.
The region code for this recorder is 2 (two).
channels for cable subscribers.
,
Note
General Features
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available on the Setup
menu.
,
Note
Moving to another TITLE
When a disc has more than one title, you can move
to another title as follows:
Press DISPLAY twice then use
s/w
to select the
title icon. Then, press the appropriate numbered
button (0-9) or
a/d
to select a title number.
Moving to another CHAPTER/
TRACK
When a title on a disc has more than one chapter/
track, you can move to another chapter/track as
follows:
Press SKIP (
C
/
V
) briey during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
Press SKIP (
C
) twice briey to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY twice. Then, use
s/w
to select
chapter icon (or select track icon). Then, enter the
chapter/track number using the numbered buttons
(0-9) or press
a/d
.
Search
1. Press SCAN (
c
or
v
) during playback.
The recorder will now go into SEARCH mode.
2. Press SCAN (
c
or
v
) to select the required
speed:
a
(Reverse play),
c
,
ca
,
cc
,
cca
,
ccc
(backward) or
v
,
dv
,
vv
,
dvv
,
vvv
(forward).
With a DivX disc the Search speed changes:
c
,
ca
,
cc
,
cca
(backward)
or
v
,
dv
,
vv
,
dvv
(forward).
3. To exit SEARCH mode, press
z
(PLAY).
RC689D-P.BITALLU_MFL65225535_ENG.indd 38 11. 2. 1. �� 12:12