Filter
Top Products
Operation
27
Playing a DVD
Playing a DVD
Playback Setup
1. Turn on the TV and select the video input source
connected to the DVD+VCR.
2. Turn on the audio system (if applicable) and
select the input source connected to the
DVD+VCR.
3. Press OPEN/CLOSE (Z) to open the disc tray
and load your chosen disc in the tray, with the
playback side down.
4. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press N (PLAY).
In some cases, the disc menu might appear
instead.
5. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. “
X
x” appears on the screen briefly.
Press N (PLAY) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc (“x” appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER (1), the disc tray closes automati-
cally and unit turns off.
If a menu screen is displayed
The menu screen may be displayed first after loading
a DVD which offer a menu.
Use the bB v Vbuttons to select the title/chap-
ter you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
Notes:
• If parental control is set and the disc is not within the
rating settings you must input the password.
(See “LOCK” on page 19).
• DVDs may have a region code. Your player will not play
discs that have a region code different from your player.
The region code for this player is 1 (one).
General Features
Notes:
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be
available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move
to another title. Press DISPLAY and select desired
title by using number (0-9) or b / B then press
ENTER to move to another title.
Moving to another CHAPTER
When a title on a disc has more than one chapter,
you can move to another chapter as follows:
• Press SKIP (> or .) briefly during playback
to select the next chapter or to return to the
beginning of the current chapter.
• Press SKIP (.) twice in quick successions to
step back to the previous chapter.
•To go directly to any chapter during DVD play-
back, press DISPLAY and press v / V to select
the chapter icon. Input the chapter number (0-9)
or use b / B.
Slow Motion
1. Press PAUSE/STEP (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2. Use FORWARD (M) to select the required
speed: T 1/7, T 1/6, T 1/4, or T 1/2 (forward).
3. To exit Slow Motion mode, press N (PLAY).
Note:
Slow motion playback in reverse is not possible.
DVD
DVD
DVD
DVD