Filter
Top Products
17
Setup Menus
AUDIO SETUP
AUDIO OUT
If you are using the unit as a stand-alone device,
i.e. without using an external decoder - set to
ANALOG.
If you are using an external audio decoding device -
set to SPDIF/RAW.
If you are recording to an external digital source (e.g.
DAT player) - set to SPDIF/PCM.
OP (operation) MODE
If you are using speakers other than your TV’s – set to
LINE OUT.
If you are only using your TV’s speakers – set to TV
OUT.
DUAL MONO
This menu is for DVDs which have separate audio
tracks for the left and right channels.
To hear only the left channel - set to L MONO.
To hear only the right channel - set to R MONO.
To combine the discrete left and right channels - set
to MIX MONO.
For normal use (i.e. most DVDs) - set to STEREO.
DYNAMIC
This feature allows you to add compression to the
audio signal. Adding compression reduces sudden
increases in volume, such as the sound of an explosion
on a DVD. FULL means minimum dynamic range
(maximum signal compression), OFF means maximum
dynamic range (no signal compression).
To adjust the dynamic setting use / on the front
panel or handset.
PRO LOGIC
For DVDs
Set to OFF - Stereo tracks on a DVD will play
as stereo.
Set to ON - Stereo tracks on a DVD can be
played as stereo or decoded to up
to 5.1* channels (depending on
the audio mode selected – see
Surround sound and audio modes
in Playing Discs chapter).
Set to AUTO - The unit will read the code
embedded on the DVD and
automatically choose the audio
format.
For CDs
Set to OFF - CDs will always play as stereo.
Set to ON - CDs can be played as stereo or
or AUTO decoded to up to 5.1* channels
(depending on the audio mode
selected – see Surround sound
and audio modes in Playing Discs
chapter).
*5.1 refers to the total number of speakers that may be
connected to the unit:the ‘5’ are centre,two fronts and
two rear speakers, the ‘1’ is a subwoofer.
LPCM OUT
If playing a DAD (Digital Audio Disc), set to 96K option.
For all other discs, set to 48K option.