Filter
Top Products
12
TV mode
In initial installation and daily operation, the TV
set is in TV mode. This is also the case when none
of the other modes of operation such as EPG,
Teletext, PIP, Video or Radio is selected.
Every one of these modes of operation has a
menu which you can call with the M-button and
with some color button assignments.
Function of the color buttons in TV mode
You can assign the functions of the four color
buttons yourself. The following functions are set
at the factory:
red: list or call personal teletext
pages
green: call picture format setting
yellow: call last viewed station
blue: call station info
You can assign other functions to the buttons in
the TV menu ”Settings” – ”Function keys”.
Status display
Show/hide status
Main information
Call main information
The explanation of the remote control shows
the function of every button in different modes
of operation of the TV set and the remote con-
trol.
The index answers many questions regarding all
aspects of the TV. If it is a question about the
operation, you have direct access to the operat-
ing function from the index.
Loewe TV sets are supplied in different models
with different equipment. You can find out what
equipment your TV has under the menu item
”Technical spec. of the TV set”.
When you have made all the settings and
connections, you can switch over to ”Simplified
control” using ”Select Mode”. Then the
”Settings” and ”Connections” can no longer be
launched in all modes of operation menus.
Switch ”Simplified control” back off when you
want to make settings.
Call the TV menu
Launch the TV menu
Modes of operation
Some settings in the TV menu:
Child lock
Use the child lock if you want to prevent your
children watching after a certain time, once or
daily, all or certain programs.
On-screen displays
You can define duration and position of the
displays, the content of the program and status
display and activate or deactivate zap2text as a
display.
Timer functions
You can have your TV switch on and off at spe-
cific times or have yourself reminded by a signal
tone.
Time and date
When you receive teletext, the TV records the
right date and time settings. The time serves as
information for timer recordings, timer functions
and EPG. If you do not receive teletext you
should set the date and time and not switch the
TV off with the mains button as the settings will
then be lost.
Language
If ”your” menu language is not set, you have to
select the ”Language” menu in a language you
cannot understand:
Press the M-button (TV menu), mark the last
menu item (settings), press the OK button and
mark the last menu item (Language) under
”other ...” and press the OK button.
Now select the right language and confirm with
OK.
E
i
Main information
Autom. channel search
Explanation of the remote control
OK
M
i
E
Back
Info
End
Connections
Select control level
Select and call up
with OK
Technical spec. of TV set
Index
Clock 20:15
1 ARD Stereo
zap2text
Some stations use this service. If teletext pages
are referred to during a program, the TV set
saves and/or displays this page number. You
call the teletext page with the T button from
the display during the program or from this
menu.
Standard values
You can save the setting for picture and sound
you have made in this menu and launch them
again later.
Connections
You will find information about this in the
chapter ”Logging in and connecting AV equip-
ment” on page 18.
M
TV menu
Standard settings
Sound
zap2text
Picture
Connections
Settings
BAQ2550H_31308_020_3_GB2 07.05.2004, 10:58 Uhr12