Filter
Top Products
19
Operating additional equipment
Calling an AV program in the AV selection
list
Call AV selection list
Select AV socket or VIDEO for
VCR transmitter.
Now you will see the playback from the
connected AV unit.
Calling an AV in the station table
Call the station table
In the numeric sorting you will always find the
AV sockets at the top of the list without station
numbers.
Mark the AV socket
Call the marked AV socket
Now you will see the playback from the
connected AV unit.
0
VIDEO AV1 AV2 AV3 AVSAV Selection
OK
Video playback
There are several ways to see the picture and
hear the sound of the VCR, DVD player or
camcorder on your TV:
1. Use the Euro-AV sockets on the TV and VCR.
This is the best way to get a good picture and
sound quality. For camcorders it is best to use
the front sockets AVS.
If you are playing back from a VCR with
Digital Link Plus, the VCR picture is shown on
the current station slot.
If you are playing back from a standard VCR,
DVD player or camcorder, select the AV
socket to which the video signal is connected
in the AV selection list or the station table.
Video recorders emit a switching voltage
during playback which the TV set can decode
(can be activated for every VCR in the
connection wizard or set Settings – AV
Settings – Allow switching voltage to ”Yes”
in the TV menu). Then the VCR picture is
shown on the current station slot as in Digital
Link Plus VCR’s.
2. You can also control logged-in Loewe VCRs
and DVD players with the video menu bar.
See page 17 for more details.
3. Use the antenna connection between the
VCR and the TV. The sound is only transmitted
in mono. Select the first menu item, e.g.
VIDEO, in the AV selection.
Channel overview: TV Numerical
AVS
AV3
AV2
AV1
0 VIDEO
1 ARD
2 ZDF
3 SAT.1
4 RTL
5 VOX
6 S–RTL
7 N–TV
8 DSF
9 TM3
10 PRO7
11 RTL 2
12 WDR 3
13 BR 3
14 HR
15 MDR 3
M
i
E
Select and
press OK to proceed
Menu
Info
End
Favourite programs
Change programs
Change sorting
OK
0 9
... Select program:
OK
BAQ2550H_31308_020_3_GB2 07.05.2004, 10:58 Uhr19