Filter
Top Products
17
Modes of operation
Pause (PAUSE)
Next chapter (only for DVD)
Previous chapter (only for DVD)
Record
Perform selected function.
When you start a recording, the channel you
have just selected is recorded. You cannot switch
over to another channel, it is locked. You can
only switch over when the recording has fin-
ished.
Exceptions:
1. You have installed several tuners (not PIP
tuners) in the TV set, then you can watch
another channel with the second tuner.
2. You can also watch the signal via an AV
connection (e.g. DVD player or a second
VCR).
3. In a VCR with Digital Link Plus the VCR tuner
is used for the recording (not for satellite
programs).
Video menu
Launch the Video menu
OK
●
▼
▼
▼
▼
❚❚
The Video menu provides you with options for
timer programming by EPG, teletext or manually.
You can also amend or delete timer information.
In the ”Connections” menu you can log other AV
equipment on or off and make a ”Digital Link
Plus data transfer”. This serves to transfer the
transmitter data of the TV set (not satellite chan-
nels) to the Digital Link Plus VCR.
Digital Link Plus VCRs have the possibility for
transferring the programme data from the TV set
to the VCR via the Euro-AV cable (not satellite
programs). Every time you change the channel
memory of the TV, you are asked whether you
want to make a data transfer.
The receiver unit of the VCR is always used for
recording with a Digital Link Plus video recorder
(not satellite channels) and the tuner of the TV
set is available for watching TV.
Loewe VCRs also have Digital Link, a system for
controlling Loewe VCRs via the Euro-AV cable. If
the Loewe VCR only has Digital Link, the TV tuner
is used for recording. If you have installed your
Loewe VCR in a concealed place, you can operate
the Loewe VCR with the remote control. Operati-
on with the control bar also works with Digital
Link.
Digital Link must be switched on on the
video recorder.
Only use fully wired Euro-AV cables, otherwise
Digital Link or Digital Link Plus will not work.
M
Video mode
You can operate Loewe video recorders and DVD
players with the video control bars even if they
are hidden. The VCR’s must be connected to the
Euro AV sockets (Scart) and logged in under the
”Connections” menu.
Digital Link must be switched on on the Loewe
video recorder. Only then can you use the con-
trol bar. You also need Digital Link for timer
recordings of satellite programs controlled by
the TV set.
You can display up to two control bars but they
are only displayed by logged in VCR’s and DVD
players.
Show/hide video
control bar
Select the video control bar if
several VCR’s or a DVD player
and a VCR are connected.
Select function
Switch VCR/DVD on/off
Select video input (Euro-AV
socket) for the VCR
Rewind (only for VCR) or Scan
in rewind
Stop (STOP)
Playback (PLAY)
Fast forward (only for VCR) or
Scan in fast forward
■
▼
AUX
▼
▼
V
=
Video menu
Delete timer
Connections
OK
M
i
E
Back
Info
End
Timer change
Timer recording
STOP
▼
▼
▼
▼
▼
❚❚
■
AUX
VCR STOP
▼
▼
▼
▼
▼
●
❚❚
■
OK
M
i
E
Menu
Info
End
DVD
▼
▼