Filter
Top Products
21
What to do if …
Problem
Various menu items cannot be launched
(shown in grey) or the menus for the EPG and
teletext modes of operation cannot be
launched
Timer recording, Change timer and Clear timer
are not shown in the Video menu
”Connections” cannot be launched in the Video
menu (shown in grey)
The ”Channels” item in the TV menu and the
”Automatic channel search” item in the main
information cannot be launched
Control of the Loewe VCR with the video con-
trol bar and the timer does not work or does
not work properly
General problems with connecting external
devices through an AV input
Picture shifted horizontally
Possible cause
”Simplified control” activated in main informa-
tion
No video recorder logged in
a) A timer recording is currently in progress
b) You are recording from the TV set with the
video bar
The child lock is activated. If these menus were
accessible, children could still set the programs.
a) The VCR’s Digital Link function is not activated
or not possible
b) Euro-AV cable not connected
c) Video recorder not logged in
a) The device is not logged in to the ”Connec-
tions” menu or is connected differently to
shown in the connection diagram
b) The AV norm is set incorrectly
c) The AV signal is set incorrectly
The TV set is in the Southern hemisphere (e.g.
Australia, South Africa)
Remedy
Deactivate ”Simplified control” in the main infor-
mation. Press the i-button, select ”Select control
level” and launch with OK. Set the ”Simplified
control” to ”no”.
Log in VCR in the TV menu
- Connections.
a) Wait until the timer recording has ended or
clear the timer.
b) Wait until you stop recording.
Deactivate programme-related child lock: Switch
off child lock or enter PIN in the TV menu - Set-
tings.
a) Activate Digital Link in the VCR (see operating
instructions of the VCR)
b) Connect the Euro-AV cable
c) Log in the VCR
a) Compare the connection diagram with the
actual installation in the ”Main information”
under ”Connections” and connect as shown if
necessary.
b) Set the correct norm.
c) Set the correct AV signal.
If ”Automatic” is set for AV norm or AV signal,
this can lead to wrong detection in the case of
non-standardized signals. In this case the norm
and signal must be set according to the oper-
ating instructions of the external device.
Set the horizontal position:
a) Launch the main information with i
b) Launch Index – Set picture – Horizontal
displacement
c) Set horizontal picture position.