Loewe L 32 Flat Panel Television User Manual


 
- 22
DVB subtitles
If the station provides DVB subtitles, then you can have the TV display them
permanently or suppress their display. You can also select between subtitles “for
translation“ or “for impaired hearing“.
1. Call the “TV menu“ via the MENU button.
2. Select the “Settings“ line and confirm using OK.
3. Select the “Miscellaneous“ line and confirm using OK.
4. Select the “DVB subtitles“ line and confirm using OK.
Note: If you have selected “Subtitles off“, then the set generates an on-screen
display when subtitles are available.
By using the END button, you can open the status display and you can display the
subtitles again by using the TEXT button.
Call the status display by pressing the END button, if it is not yet displayed.
When the status display is visible, press the TEXT button.
Select the desired language and confirm using OK. The presetting changes for
the current programme.
Which subtitle languages can be selected depends on the provider.
The automatic shortlist is determined by the menu language and the selection
made in the “DVB subtitles“ settings menu.
By pressing the END button, you can hide the menu again.
Note: DVB subtitles are not available when digital teletext is being displayed.
Operating modes – TV
Parental lock
You can lock the TV from “immediatly“, “daily“ for a certain period of time or
“agerelated“ for DVB programmes with age restrictions.
Here, you determine the PIN to enter if you want to watch locked programmes.
Timer functions
You can have your TV switch off at pre-programmed times or wake you/remind you
with radio or TV. If you are not present at the time, a safety prompt makes sure the
TV switches off again after 5 minutes.
• Switch off today only • Switch off daily • One-time reminder
• Wake up Mon-Fri • Wake up Sat • Wake up Sun
• Wake up with
• Wake up signal volume
Language
If “your“ menu language is not set, you have to select the “Language“ menu in a
language that you do not understand. Therefore here is a simple way to set the
right menu language:
1. Press the INFO button (index), select the first listing (this is above A).
2. Call the language selection by pressing the OK button.
3. Now select the desired language and confirm it by pressing the OK key.
4. Hide the menu again with the END button.
Miscellaneous (settings)
On-screen displays
You can set the duration and position of the station and status display, define the
content of the status display and switch the automatic info texts on or off:
• On-screen display position • On-screen display time • Programme title •
Sound mode • Time • Alarm time • Sleep timer • Automatic info
Time and date
If you receive teletext, the set registers the time and date. These are required for
timer recordings, timer functions and EPG. If you do not receive teletext, then you
have to enter the date and time; you should not switch off the set using the mains
switch since the settings will then be lost.
DVB software
Update of DVB software via satellite
.
DVB subtitles
• Subtitles off • Subtitles for the Hearing Impaired
• Subtitles as translation for foreign language programmes
DVB character set
• Western European • Polish • Standard.
Only for sets with DVB-S
END
INFO
Subtitles off
for impaired hearing
for translation
DVB subtitles
OK