Filter
Top Products
9 -
Call up the Index using the INFO button on the remote control, select “DRM
(Digital Refresh Mode)“ and start the Refresh mode by pressing the OK button. Al-
ternating full-screen colour images will be displayed now instead of the TV picture.
Run the Refresh mode for about as long as a freeze picture was displayed earlier.
End the Refresh mode by pressing any button on the remote control.
Any effects resulting from an excessively long display of a freeze frame cannot be
reversed using the “DRM“ function.
Cleaning
Use only a soft, clean, damp cloth to clean the TV set, the screen and remote
control (do not use any caustic or abrasive cleaning agents).
Disposal
Packing and box
You have chosen a long lasting technical product of very high quality. We have
paid a fee to authorised recyclers who will collect the packing from your dealer for
disposal, pursuant to domestic regulations. Nevertheless, we recommend you to
keep the original box and packing material for optimum protection if you have to
transport the set.
The set
Attention: The EU directive 2002/96/EC regulates the proper
way to recycle, handle and utilise used electronic devices.
Hence, all used electronic devices are to be disposed of separa-
tely. Please do not dispose of this set in the normal household
rubbish.
You may return your used set free of charge at designated recyc-
ling centres or at your specialist dealer whenever you purchase a new, comparable
set. You can find out more about recycling (also for countries outside the EU) from
your local government.
Welcome
Note on the plasma screen (Xelos A 42 and Modus L 42)
IMPORTANT!
PLASMA SCREEN TECHNOLOGY IS NOT SUITABLE FOR THE DISPLAY OF FIXED IMAGES FOR EXTENDED PERIODS OF TIME.
A fixed image displayed for an extended period can cause permanent “image retention” to appear on your Plasma screen.
Examples of fixed images include logos, video games, computer images, teletext, interactive applications and images displayed in 4:3 mode etc. If using such applications
it is advised to reduce the “Contrast” setting to minimise the risk of image retention. It is recommended that these images are not displayed for long periods.
Note: Permanent “image retention” on a Plasma TV resulting from fixed image use is not an operating defect and as such is not covered by the warranty.
You will be reminded of this warning through an on screen message after switch
on. It will not appear if it is deactivated in the menu. To do this press “Menu“
followed by selection of “Settings“ – “Miscellaneous“ –“On screen displays“
– “Automatic Info.“ then finally select “No“, alternatively it will automatically stop
appearing after the menu has been entered twenty times.
The TV set with plasma screen you have purchased meets the highest quality
requirements and has been tested for pixel errors. Despite the utmost caution in
production of the displays, it cannot be totally ruled out that some of the pixels
might not light up for technological reasons. Please understand that such effects
cannot be considered a unit defect as defined by the warranty as long as they are
within the limits specified by the standard.
For plasma screens, the emission of light decreases the longer the unit is used.
Plasma screens work by using phosphor. In certain operating conditions, this
technology may facilitate image burns. These operating conditions include:
Lengthy, continuous display of a freeze picture (>10 minutes).
Constant display of the same background.
Use of a format that does not entirely fill the screen (such as 4:3) for a longer
period of time.
Once an image is burnt into the display, it is usually not possible to remedy the
problem; this situation is neither covered by the warranty nor by the guarantee. To
avoid or reduce image burns on your screen, please follow these instructions and
recommendations:
During the first 100 hours of operation, you should display moving pictures for
the most part or freeze pictures that change frequently; these images are to fill
the entire screen.
Use your screen in a full-screen format (16:9).
If you use the screen as a PC monitor, always activate the screen saver.
Switch the TV set off when it is not being used.
Reduce the contrast and brightness as much as possible.
The “DRM“ function (Digital Refresh Mode), which can be called in this set, may
be able to eliminate or reduce minor visible effects.
•
•
•
•
•
•
•
•