Filter
Top Products
14
TV menu
Call up TV menu
You will find a description of the picture and sound settings on page
12. The TV menu offers others for recording and connections and for
TV settings
Under “Recording“ you will find the functions:
New recording
• via EPG • via teletext • manual recording
If you have connected a Digital Link Plus Recorder, the timer data will
be transmitted to the recorder that will start recording automatically.
Pre-record time and Post record time
For recordings without VPS you set Pre-record time and Post record
time here so that the program is fully recorded in case of slight
differences in the time.
Under "Connections" you will find the following functions:
Here you can connect additional equipment such as video recorders,
DVD players/recorders, camcorders/digital cameras or Pay-TV
decoders. Select the connection (AV1, AV2 or AVS) to which you
want to connect a device and select the type of device in the list
which then appears (see also page 19).
Others settings under "Connections":
• RGB insertion (AV1) to play back RGB signals.
• Switching voltage to display the signals of the connected device
immediately on the screen via Euro AV during playback
• Digital Link Plus: Transmission of the program data from the TV set
to the video/DVD recorder if a recorder with Digital Link Plus is
connected (see page 20).
Connections Recording Sound
INFO
END
Settings
Connections
Recording
Sound
TV menu
Picture
Under “Settings“ you will find the following functions:
Programmes
Here you can search for and store new stations automatically or
manually. In “Change“ you can move and delete stations and change
station names.
• Automatic search • Manual settings • Change
Parental lock
If you want to prevent your children from using the set unsupervised,
activate the parental lock.
Timer functions
You can have your TV switch off at pre-programmed times or wake
you/remind you with radio or TV. If you are not present at the time, a
safety prompt makes sure the TV switches off again after 5 minutes.
• TV off once only • One-time reminder • Wake up daily •
Wake up with • Wake up volume
Time and date
If you receive teletext, the correct date and time setting is detected
by the set. The time serves as information for timer services and EPG.
If you do not receive teletext, you should set the date and time. Use
the numeric buttons on the remote control and the arrows to
move from one digit position to the next.
In the time and date menu you can also set when you want the TV
set to automatically start and end daylight saving. You can also set a
deviation UTC.
Language
You can set the language in which the menus are displayed under
Settings - Language.
If "your" menu language is not set, you may have to select the
"Language" menu in a language you cannot understand:
1. Press the INFO key while no menu is displayed. The index
appears.
2. Select the first entry on the first page (1/3), if it is not selected
automatically.
3. Confirm with OK.
You are now in the language menu and can select your language.
MENU
Modes of operation - TV mode
32172_XelosA22_GB 03.05.2005, 9:27 Uhr14