Filter
Top Products
21
Display Modes
Display Modes
Initial Loading Sequence
• Connect the POWER cable located on the back of
the Observation System. The unit will automatically
power on.
• The System will load the firmware
• The System will perform a Hard Drive check.
• The unit will initially load to a split screen view,
displaying all 4 cameras (if available).
General Display Overview
NOTE: If a new HARD DRIVE is detected, the system
will prompt you to FORMAT the drive. If you do not
choose to format the HARD DRIVE, the drive will not
be detected by the system.
If you choose to FORMAT a drive in this way, the
drive will no longer be readable by a regular PC
without using the HARD DRIVE VIEWER software
included on the CD provided with this unit.