Filter
Top Products
42
EXTERNAL DEVICE
3. INTERVAL - Set the interval for the system to
report its IP address to the DDNS server
automatically. (D- day / H- hour / M- minute). Use
the Mouse Wheel to change the value.
4. REGISTER - Connect to the DDNS server and
register the system information to the server. Click
REGISTER to start the registration.
5. DNS STATUS - Indicates the current status of
DDNS connection
• IP ADDRESS: Indicates the current IP address
recorded in the server
• IP PORT: Indicates the current IP port recorded
in the server.
• REMAIN TIME: Indicates the remaining time
until the next connection to the server.
6. LAST REGISTRATION DATE - Displays the time
of the last registration.
TCP/IP SETUP - SPEED
Controls the system bandwidth use (network
speed). Settings between 1 (low) ~ 9 (high)
PAN/TILT SETUP - COMMAND SETUP
1. CHANNEL - Select the channel for PTZ (PAn/TILT/
ZOOM) Camera control. PTZ Camera is not
included with the system.
2. MODEL - Select PTZ protocol.
3. PTZ ID - Select PTZ ID.
4. BAUDRATE - Select Baud Rate of PTZ control
code.
5. CMD DELAY - Set up a delay time to run the
command.
6. COMMAND - Pick up PTZ CMD.
7. LENGTH - Displays the length of PTZ control code.
8. CODE - The control code of PTZ CMD.