Filter
Top Products
17
NORMAL PLAYBACK
PLAYBACK
The indicator will light and the VCR will power-up auto-
matically.
• If a tape without a record protect tab is inserted, the unit will
start the playback automatically.
Press REC/PB SPEED (DOWN or UP) button to choose the
desired time mode.
The select time is displayed in the VCR indicator panel.
Select the time while the tape is stopped or being played back.
6H
➔
18H
➔
30H
➔
72H
➔
96H
➔
120H
➔
168H
➔
240H
➔
480H
➔
960H
• The time mode can not be changed while the tape is playing
back in 2H or 4H.
• If the tape reaches the end before STOP/EJECT is pressed,
the VCR will automatically stop and rewind.
If noise appears on the screen during playback, press either
TRACKING (MOVE / SEL) buttons until the noise on the screen
is reduced.
• In case of vertical jitter, adjust these controls very carefully.
• Tracking is automatically reset to normal when the tape is
ejected.
TRACKING CONTROL
NORMAL PLAYBACK
1 Insert a prerecorded video cassette.
2 Press the PLAY/REC CHK button.
3 Press the STOP/EJECT button to stop playback.
PREPARATION
• Turn on the power of both the VCR and the monitor.
• If you have a TV instead of monitor, turn on the power of TV
and then set the TV’s source selector to VIDEO.
NOTES:
• Ensure that the selected tape recording and playback times match one another.
• A picture may vibrate vertically, but this is normal. Adjust the tracking
• A distortion may appear on the top of the screen, but this is normal. Adjust the tracking
• A sound may be muted during playback, but this is normal.
• If the recording hour and playback hour are different, the sound may not play back normally. (Set the
AUDIO PLAY to OFF mode on the VCR SET UP menu.)
ALARM
KEY
LOCK
PAUSE / STILL
REV
REW
F.F
CUE
STOP / EJECTPLAY / REC CHK
CLEAR
KEY LOCK OFF
BUZZER OFF
CLOCK
COUNT
REMAIN
POWER / TIMER
MENU
REC
REC / PB SPEED
TRACKING
MOVE SEL
DOWN
UP
CLEAR
BUZZER OFF
LOCK OFF
CLOCK
COUNT
REMAIN
TRACKING
REC / PBSPEED
KEY LOCK
ALARM
MENU
MOVE
DOWN
SEL
UP