Filter
Top Products
5
PREPARATION
FRONT
CONTROL NAMES AND LOCATIONS
1. POWER/TIMER button
(Press for on; press again for off)
The display window becomes brighter
when the VCR is switched on.
Timer function is activated when power
switch is in the Off position.
2. MENU button
Press to activate the Menu selection.
3. REC (RECORD) button
Press to begin recording.
4. MOVE button
Press to change a value in Menu mode
or to operate tracking during playback
or slow.
Press repeatedly to move the Time and
Date display’s position.
If a still picture vibrates vertically, stabi-
lize it by pressing the MOVE button.
5. SEL (SELECT) button
Press to change the value or to operate
tracking during playback or slow.
If a still picture vibrates vertically, stabi-
lize it by pressing the SEL button.
6. DOWN button
Press to set speed in descending order 30H,
18H, 6H.... during recording or playback.
7. UP button
Press to set speed in ascending order
6H, 18H, 30H.... during recording or play-
back.
8. ALARM Indicator
Illuminates when alarm record is set on and
blinks during alarm record.
It can be turned off by setting REC MODE to
OFF under ALARM SET UP menu (only
when there is no alarm record informa-
tion on the ALARM RECALL menu. To
erase the alarm record information, refer
to “To erase the alarm record informa-
tion” on page 27).
9. KEY LOCK Indicator
Illuminates during key lock mode is activated.
10. Cassette loading slot
Cassette tape is inserted in this slot.
11.CLEAR, KEY LOCK OFF, BUZZER OFF
Press to delete the information stored on
screen display, such as Alarm recall,
Power fail and Timer program.
It can also be used to stop the buzzer
sound and to release key lock mode if it
is held for at least 3 seconds.
12. CLOCK, COUNT, REMAIN
Pressing this button toggles between the
CLOCK, COUNT, and REMAIN displays.
CLOCK shows the current time. COUNT
shows the incremental counter for
recording or playing, and REMAIN indi-
cates the remaining time on the tape.
13. Shuttle Ring
Refer to page 19.
14. Jog Ring
Refer to page 19.
15. PAUSE/STILL button
When pressed during recording, tape
movement stops temporarily. Press again
to continue the recording.
When pressed during playback, tape
movement stops. Press again to advance
by still frame.
It can also be used to search alarm
recording by pressing this button in stop
mode.
16. PLAY/REC CHECK button
Press to play back a previously recorded
tape. Press this button during recording
to confirm the recording operation. It
plays back the recording on screen for 4
seconds and returns to recording mode.
17. STOP/EJECT button
Press once to discontinue all tape related
functions. Press again to eject the cas-
sette.