Mace DVR0804RW DVR User Manual


 
 
  !
39
1. Setting up the client end
No special software is needed to install on the DVR, PC or other devices in order to access DVR using the IE
browser. If the IE responds back “Page Cannot Be Displayed” or “Server not Found”, check your network
connection carefully.
2. Login and logout
Please input the IP address of the DVR in the address column of the browser. Take the DVR’s IP address:
192.168.0.168 as an example: Input http://192.168.0.168. Note: The first time you visit this DVR the system
will pop up the dialogue box to ask whether you accept ActiveX or not, and please choose Yes, then the
system will install the software automatically.
On the remote monitor display, there is a monitor video window, with selection choices: loginlogoutsearch,
config(system setting)Assistant(assistant setting) and so on.