Filter
Top Products
Page 18
2) SETUP OPTIONS INFORMATION
A) SYSTEM SETUP
The SYSTEM SETUP options are illustrated below:
z TV SYSTEM
Adjust to change the Color System of the TV (Note that
in North America the NTSC color system is used). You
can choose from the following TV SYSTEM options.
AUTO
: Choose this setting if your DVD player is
connected to a multi-system TV.
NTSC
: Choose this setting if your DVD player is
connected to a NTSC TV.
PAL
: Choose this setting if your DVD player is
connected to a PAL TV.
PAL 60
: Choose this settings if your DVD player is
connected to a PAL 60 TV.
z SCREEN SAVER
If the screen saver is on, when you DVD player is in
STOP, OPEN or NO DISC state, or there is a frame
frozen for more than 60 seconds, the screen saver will
be displayed. This feature can protect your screen from
image burn-in damage.
ON
: Choose this setting to activate the screen saver.
OFF
: Choose this setting to cancel the screen saver.
The default setting is ON.
z VIDEO
INTERLACE-YUV
: Choose this setting if your DVD
player is connected to a TV with Y, Cb, Cr (Non-
progressive Component) video cables.
TV-RGB
: Choose this setting if your DVD player is
connected to a TV with a S-VIDEO or composite (RCA)
video cables.
P-SCAN YPBPR
: Choose this setting if your DVD player
is connected to a progressive scan TV with Y, Pb, Pr
(Progressive Component) video cables.
PC-VGA
: Choose this setting if your DVD player is
connected to progressive scan TV with VGA video cable.