Filter
Top Products
Page 19
D) VIDEO SETUP
The VIDEO SETUP options are illustrated below:
z COMPONENT
CVBS
: Choose this setting when your DVD player is
connected to your TV via the normal RCA or S-Video
output.
YUV
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output -
YUV.
RGB
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output -
RGB.
VGA
: Choose this setting when your DVD player is
connected to the computer monitor via the VGA output.
Warning
: If you are not sure about the connect, please
always select the CVBS. Otherwise, the output screen to
the TV/Monitor will be blank.
If you have wrongly selected the video output type
and you got the blank screen on your TV/Monitor,
please press the RESET button on the remote control to
restore the pre-factory setting – CVBS.
z TV MODE
P-Scan
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output –
YUV or RGB and your TV type should be Progressive
Scan type.
Interlace
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output –
YUV or RGB and your TV type should be normal
interlace type.
Warning
: If you are not sure about the connect, please
always select the INTERLACE. Otherwise, the picture
output to the TV/Monitor will be distorted.
If you have wrongly selected and you got the
distorted picture on your TV/Monitor, please press the
P/I button on the remote control to restore the pre-factory
setting – INTERLACE.
Note
:
This setting is only selectable as long as you have
selected YUV or RGB from the Component setup
sub-menu.