Filter
Top Products
Display Settings (cont’d) 47
5
6
5
Press
K
or
L
to select an item, then press
ENTER.
● If you selected TV MODE, press K or L to
select a setting, then press ENTER.
Choose 4:3 LETTER BOX if you want to see the
entire, widened picture with black bars at the top
and bottom of the screen. This looks like the
picture you see when watching movies in a theater.
This setting is possible only if the DVD was
recorded in the letterbox or widescreen format.
Choose 4:3 PAN & SCAN for a full height picture,
with both sides trimmed. Some companies refer to
this as reformatting the picture to fit your TV
screen and may call it the regular or normal format.
● If you selected STILL MODE, press K or L to
select a setting, then press ENTER.
This function allows you to adjust the quality of a still
image.
AUTO : The default setting.
FIELD : Still images will be stabilized but coarse due
to the limited amount of data.
FRAME : Quality of still images will be improved due
to the simultaneous output of two field data
but the images can be unstabilized.
6
Press SETUP to exit the menus.
DISPLAY
TV MODE
4:3 LETTER BOX
4:3 PAN & SCAN
OFF
ON
ON
ENTER
TV MODE
AUTO
FIELD
FRAME
DISPLAY
STILL MODE
ENTER
STILL MODE
T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 47