Filter
Top Products
22
Add Channels
This function lets you add the off the air along NTSC or analog
Cable channels that were not added by the autoprogram due
to reception conditions at the initial setting.
1 Use ▲/▼ to select [Add Channels], then press OK.
2 Use the Number buttons to enter the number of the
channel you want to add, then press OK.
Picture
Sound
Channel
Features
Language
DVD
For analog channels, select a
channel to be added using
number keys.
For digital channels, you must
perform Autoprogram function.
Add channels
Ch Change
BACK
Back
11
Note
• If setup completes successfully, [Added to the channel list.] is
displayed.
• If external input is used, it is not possible to register the channel
and [Unavailable] will be displayed on the TV screen.
• By using CH + / −, you can select the memorized channels only.
Antenna Confi rmation
AT SC
This function lets you check the digital signal strength of each
channel.
1 Use ▲/▼ to select [Antenna], then press OK.
2 Use the Number buttons or CH + / − to select the channel
for which you want to check the digital signal strength.
11.1
Picture
Sound
Channel
Features
Language
DVD
Current 50 Max 50
Back
Ch Change
Note
• If the channel is set to analog channel or external input, you
cannot confi rm the antenna condition.
Features
1 Use ▲/▼ to select the item you want to adjust, then press
OK.
Picture
Sound
Channel
Features
Language
DVD
Closed Caption
Child Lock
PC Settings
fun-Link (HDMI CEC)
Energy Saving Mode
Location
Current Software Info
On
Home
*
*
[PC Settings] will only display for 22MD311B, 19MD311B or
19MD301B.
2 Adjust the following items.
Closed Caption
You can view closed captioning (CC) for TV programs,
movies and news. Closed caption refers to text of dialog or
descriptions displayed on-screen.
Use ▲/▼ to select [Closed Caption], then press OK.
See the following description for setting each item.
Picture
Sound
Channel
Features
Language
DVD
Caption Service
Digital Caption Service
Caption Style
On
On
A
B
C
A. Caption Service
A. Caption Service
1 Use ▲/▼ to select [Caption Service], then press OK.
2 Use ▲/▼ to select the desired closed caption, then press
OK.
Off Select if you do not want caption service.
CC-1 and T-1
The primary caption and text services. The
captioning or text is displayed in the same language
as the program’s dialog (up to 4 lines of script on the
TV screen, where it does not obstruct relevant parts
of the picture).
CC-3 and T-3
Serve as the preferred data channels.
The captioning or text is often a secondary
language.
CC-2, CC-4,
T-2 and T-4
Rarely available and broadcasters use them only in
special conditions, such as when [CC-1] and [CC-3]
or [T-1] and [T-3] are not available.
• There are 3 display modes according to programs:
Paint-on
mode
Displays input characters on the TV screen
immediately.
Pop-on mode
Once characters are stored in memory, they are
displayed all at once.
Roll-up mode
Displays the characters continuously by scrolling
(max. 4 lines).