Using a Component Video cable (not
supplied), connect the DVD player’s Y, Pb,
Pr jacks to the Y, Pb, Pr jacks on the TV.
Use the AV IN 3 connections.
Note: The Component (Y, Pb, Pr) Video
Input in AV IN 3 connections can display
SD (480i) image only. If your DVD player
can output Progressive scanned or HD
(High Definition) image, please refer to
“Digital TV Receiver, or a Digital Satellite
Receiver with HD (High Definition)
Output” in next section.
Using an AUDIO cable, connect the DVD
player’s AUDIO OUT jacks to the TV’s
AUDIO IN jacks in AV IN 3 connections.
Use Source button on the remote control
to select COMPONENT to watch DVD.
Note: 1. The Y, Pb, Pr jacks do not
provide audio, so audio cables
must be connected to provide
sound.
12
DVD PLAYER OR OTHER VIDEO DEVICES
WITH COMPONENT VIDEO CONNECTORS
C
omponent Video Input (Y, Pb, Pr) provide the
highest possible color and picture resolution in
the playback of digital signal source material, such
as with DVD player.
1
2
Disconnect all power sources before
making any connections.
Accessory device equipped with
component video outputs
1
2
CC
SOURCE
PIP
MENU
OK
3
3
MAG-26_eng 0104.indd 12 1/6/2005 10:30:39