Filter
Top Products
16
EN
P
REPARATION
[PC Connection]
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cable as well.
If you connect this unit to your PC, you can use this unit as a PC monitor.
37MD350B only
DVI OUT
The following signals can be displayed:
Format Resolution Refresh rate Format Resolution Refresh rate
VGA 640 x 480 60Hz
WXGA
1,280 x 768 60Hz
SVGA 800 x 600 60Hz
1,360 x 768 60Hz
XGA 1,024 x 768 60Hz
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
55 Cable5Management
Keep the cables through this holder to avoid tangle
them.
55 Plug5In5the5AC5Power5Cord
Make sure that the AC power cord must be plugged
to an AC outlet after all the necessary connections are
completed.
Caution:
• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of
this range may result in fire or electrical shocks.
Note:
• Each time you plugged in the AC power cord, any operations
will not be performed for a few seconds.
This is not a malfunction.
* For 32MD350B, nonremovable AC power cord is already
fixed on the unit.
37MD350B
32MD350B
stereo mini plug
conversion cable
HDMI-DVI
conversion cable
rear of this unit
To HDMI1
Input jack only
HDMI-DVI conversion cable
should be with ferrite core.
e.g.)
personal computer
rear of this unit
AC power cord
AC outlet
rear of this unit
rear of this unit