Filter
Top Products
F.FWD/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 41.
Press to change the setting of an item in the on-screen menu or
press to proceed to the next menu.
SURF Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
PLAY/
▲ Button
Press to play a tape. Details are on page 28. Press to release Slow,
Search or Still mode and return to normal playback. Details are on
page 41. Press to select an item in the menu.
SLEEP/WAKE UP Button
Press to set the Sleep Timer. Details are on page 47. Press to set
the Wake Up Timer. Details are on page 48.
SPEED Button
Press to select the recording speed (SP or SLP).
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to
the previous volume level.
22 Remote Control Buttons
VOL(ume)
mm
/
nn
Button
Press to adjust the sound level. If you press the VOL(ume)
mm
/
nn
button when the sound is muted, the sound will be restored.
POWER Button
Press to turn on or off the TV/VCR.
Number Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
● Cable Users
Enter channel numbers as a two-digit number for the quickest
results. For example, to select channel 6, press 0,6. If you only press
the Number 6 button, channel 6 will be selected after a brief delay.
(There also may be a brief delay when you select channels 10, 11,
and 12.) If you want to select channels 100 and above, enter chan-
nel numbers as a three-digit number. For example, to select channel
117, press 1, 1, 7.
● Antenna Users
Enter channel numbers as a two-digit number for the quickest
results. You may only select channels 2-69. For example, to select
channel 5, press 0,5. If you only press the Number 5 button, chan-
nel 5 will be selected after a brief delay.
VOL
.
CH.
321
654
987
0
POWER
STATUS/EXIT
TRACKINGREC/OTR
SPEED
MEMORY
SURF
SLOW
PAUSE/STILL
MUTE
F.FWDREW
PLAY
STOP
SLEEP/WAKE UP
MENU
CLEAR
CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 40.
• Buttons that are shaded in the illustration light up for five seconds when you press any button on the remote
control.
Helpful Hint