Filter
Top Products
Automatic Operation Features 49
The following playback features will always operate:
Automatic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. (If a timer recording is set, you may have to press the
POWER button to turn on the TV/VCR.)
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, then eject the
tape. If a tape counter memory is set, the TV/VCR will only
rewind the tape to the point at which the tape counter was set to
zero, then stop. The TV/VCR will not turn itself off or eject the
tape.
Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewind-
ing a tape, REW → POWER OFF will appear on-screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a tape counter memory is set, the TV/VCR may only rewind the
tape to the point at which the tape counter was set to zero, then
turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR has automatic tracking, which continually adjusts
tracking to give you the best possible picture quality. With some
recordings, however, you may get a better picture using the man-
ual tracking controls (see below).
Manual Tracking
To adjust the tracking manually during tape playback, press the
CHANNEL Up/Down buttons on the TV/VCR.
NOTES:
• To return tracking to the position it was in when the TV/VCR was
shipped from the factory, press the CHANNEL Up/Down buttons on
the TV/VCR at the same time.
• Tracking is returned to automatic tracking when a tape is inserted,
or when the STOP/
▼
button is pressed to halt playback.
Before Tracking
Adjustment
After Tracking
Adjustment