Filter
Top Products
Timer Recording (cont’d) 35
Checking or Clearing Timer Recordings
• With ShowGuard, you don’t have
to worry about losing your timer
recordings. If the power fails,
timer recordings will be restored
when the clock is reset. (The
clock will reset itself automatical-
ly if you are using AUTO CLOCK.
Details are on pages 14-17. If
you are not using AUTO CLOCK,
reset the clock manually. Details
are on pages 12-13.) The timer
recording will not occur only if it
was scheduled to take place
during the power failure.
Helpful Hint
1
With the TV/VCR on, press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ but-
ton to select VCR PROGRAM, then press the
F.FWD/B button.
3
Press the PLAY/▲ button or the STOP/▼ but-
ton to select PROGRAM REVIEW, then press
the F.FWD/B button. The timer recording infor-
mation for the program in the lowest numbered posi-
tion will appear on the screen. If no timer recordings
are programmed, nothing will happen when you
select PROGRAM REVIEW and press the F.FWD/B
button.
4
Press the F.FWD/B button to display informa-
tion about the next timer recording. (If you do
not press a button within 10 seconds, information
about the next timer recording will appear automatical-
ly.) This will continue until all positions have been dis-
played. Then, the menu will disappear. You can exit
the Program Review at any time by pressing the STA-
TUS/EXIT button.
5
To cancel the timer recording displayed, press
the CLEAR button. Either the display will disap-
pear or information about other timer recordings will
appear. If you do not press any other buttons, the
display will disappear after all timer recordings have
been displayed.
6
Repeat steps 1-4 to make sure you cleared the
correct recording.
TRACKING
MUTE
REC/OTR
SPEED MEMORY
0
8 97
5 64
2 31
PAUSE/STILL
ALT.CH
STOP
F.FWD
PLAY
REW
VOL.
STATUS/EXIT
M
E
N
U
POWER
SLEEP/WAKE UP
CH.
C
LE
A
R
1
5
2-4
MC132DMG/MC192DMG 3/22/02 1:21 PM Page 35